[email protected]

A537 CLASS 2 Boiler Pressure Vessel Steel

ASTM A537 standard refers to pressure vessel plates, material in heat-treated, carbon-manganese silicon steel. Based on different strength and heat treatment, it ranges to Class 1, 2 and 3. The maximum thickness under ASTM A537 Class 1 is 100 mm [4 inch], and 150 mm [6 inch] for Class 2 and Class 3. ASME A537 & ASTM SA537 Class 1 Brown McFarlaneClass 1 steel is supplied in the normalised condition and the specification covers plates up to 100 mm (4 inches) in thickness. ASME SA537 Class 1 / ASTM A537 Class 1 Specification. The chemical and tensile requirements for ASME SA537 Class 1 and the ASTM A537 Class 1 produced steel can be found in the tables below this section.

ASME SA537 Class 2 Carbon Steel Plates, ASTM A537 CL. 2

ASTM A537 Class 2 Carbon Steel Plate Specification :Width:1000mm-4500mm Thickness:5mm-150mm Length:3000mm-18000mm Supply Condition :Quenched and tempered, BQ Plates with IBR form IV, Furnace Normalised, MTC acc to EN 10204 3.1 / 3.2, Ultrasonic tested as per SA 578 or any other as per requirement Impact tested :-52° C Tempering:Notch toughness can be improved by ASME SA537 Class 2 STEEL PLATES ASTM A537 Class 2 ASTM A537 Class 2 steel is a higher yield and tensile strength material used in the fabrication of pressurised vessels and steel boilers. The steel includes the alloying of carbon, manganese and silicon and is heat treated using the quenched and tempered method which gives the ASME SA537 Class 2 Steel Plates, ASTM A537 Class 2, SA 537 ASME SA537 Class 2 Plate material is used in a variety of applications including pressurised tanks and heat exchangers. ASTM A537 CL.2 Boiler Quality Steel Plates steel shall be killed and undergo normalization, quenching and tempering. SA537 Class 2 Pressure Vessel Plates is mainly used for manufacture in the oil and gas and petrochemical industries.


ASTM A537. The ASTM A537 specification is the Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel used in the applications of fusion welded pressure vessels and structures. Typical applications are pressure vessels designed for moderate and lower-temperature service requiring excellent notch toughness Carbon Steel ASTM A537 Class 1 Structural Steel PlatesASTM A537 / ASME SA537 Class 1, Class 2, Class 3:Thickness:6mm 300mm:Length:3000mm-15000mm:Width:1500mm-4050mm:Application:Pressure Vessel Plate, Steel Boiler plate:Surface:Coated or Shot Blasting and Painting:Delivery state:Hot Rolled, Cold Rolled:Export to:United Arab Emirates, Saudi Arabia, Iran, Malaysia, Singapore, etc. Top 10 a537 class 3 sheet application suppliers in China Steel production and rolling technology and equipment also pursue the continuity between processes, such as the continuous A537 Class 3 sheet application process between continuous casting and rolling mills, continuous casting slabs hot transfer hot charging, increased direct rolling, and continuous cold rolling processes. The development of controlled rolling and controlled cooling technology that

astm a537 class 1 low temperature-HERNA STEEL Material

ASTM A537 Steel Plate - Class 1 Class 2 High-strength heat-treated ASTM A537 PVQ steel plate is ideal for both boilers and pressure vessels.Overview Heat-treated pressure vessel quality steel plate to increase yield and tensile strength,especially when compared to A516 grades.Available in three classes 1,2 and 3.Classes 2 and 3 are quenched and tempered,whereas class 1 is ASTM A537 Class1|Class2|Class3 Pressure Vessel Plate for ASTM A537 class1 steel ASTM A537 Steel Plate - Class 1 & Class 2 Leeco Steel, LLCHigh-strength heat-treated ASTM A537 PVQ steel plate is ideal for both boilers and pressure vessels. Overview:Heat-treated pressure vessel quality steel plate to increase yield and tensile strength, especially when compared to A516 grades. Available in three classes:1, 2 and 3. Classes 2 and 3 are quenched and tempered, whereas class